Sunday 27 May 2012
Headlines
Did you find this story interesting? (0) (0)
12/08/2011 15:45:15
Renewable energy project cuts costs at animal feed mill
North Yorkshire company, Duncan Renewables, has completed one of the largest roof-mounted solar photovoltaic (PV) projects in the UK over the summer, after installing solar panels at WE Jameson’s animal feeds in Masham.
Solar PV installations harness energy from the sun to produce electricity, explains Duncan Renewables spokesman, Mark Duncan, whose company is based in Tockwith near York. Their popularity has grown, following the introduction of the Government’s ’Feed in Tariff’ (FiT) scheme. It entitles owners of domestic and commercial PV systems to claim money back for every kilowatt hour (kWh) of electricity generated. Feed-in tariffs are ’generation tariffs,’ offered for the production of electricity, with additional savings on energy bills from using the power. If the equipment owner is unable to use the electricity, it is exported to the National Grid, for which an additional ’export tariff’ payment is received. The revenue is inflation-linked and government-guaranteed for 25 years.
Solar PV systems can be retro-fitted on to existing roof structures, or incorporated into new build projects, says Mr Duncan. One advantage is that unlike some other renewable systems, they do not result in a loss of usable building space. On average, 50% of the energy produced will be used, with the combined income and savings normally paying back the initial investment within 10 years. There are also other benefits, he adds.
"Solar PV systems are one of the best options for reducing the carbon footprint of a business – or an ordinary household," says Mr Duncan. "The technology is proven, even in the UK, and because there are no moving parts it is reliable and virtually maintenance free."
The WE Jameson installation used 540 solar panels, to create a system specification of 99.9kWh. The feed mill site, which also has a country store selling a wide range of gardening, pet and DIY products, remained open throughout the construction period. The project put Duncan Renewables staff under particular pressure, due to changes introduced after a review of the FiT scheme this spring, says Mr Duncan.
"Clients with systems over 50kWh used to be able to claim 32.9 pence for every free kWh of electricity produced, but the payment has been reduced to 19 pence. The new figure applies to any projects commissioned after August 1 this year. We have been working hard since the spring, to ensure that ongoing projects were completed before the new rule was applied."
All commercial installations currently require planning permission, and need to be signed off by a district network operator, stresses Mr Duncan. Therefore, anyone thinking about installing a commercial PV system should allow a lead time of at least nine weeks. The necessary consents should also be obtained well ahead of the next scheduled changes to FiTs, in case further payment reductions are introduced.
Says Graham Jameson:
"Our feed mill has an enormous requirement for power, so reducing our reliance on carbon-based energy is a priority for us. Having a huge area of redundant roof space seemed to be a wasted asset and once the Government brought in the FiT scheme, fitting a PV system to the roof was the logical conclusion.
"The electricity will be used on site except outside production hours, when it will be exported into the National Grid. We knew that beating the August 1 deadline was going to be tough, and missing it would have reduced the returns from the system, so we needed an experienced contractor with skilled manpower. That’s why we chose Duncan Renewables, and they have not let us down – they have been professional from the outset and have shown great awareness of our obligations to our customers and for health and safety while working on our busy site. We are now planning an open day, so the general public can view the installation."
 |
 | Graham Jameson |
Solar PV installations harness energy from the sun to produce electricity, explains Duncan Renewables spokesman, Mark Duncan, whose company is based in Tockwith near York. Their popularity has grown, following the introduction of the Government’s ’Feed in Tariff’ (FiT) scheme. It entitles owners of domestic and commercial PV systems to claim money back for every kilowatt hour (kWh) of electricity generated. Feed-in tariffs are ’generation tariffs,’ offered for the production of electricity, with additional savings on energy bills from using the power. If the equipment owner is unable to use the electricity, it is exported to the National Grid, for which an additional ’export tariff’ payment is received. The revenue is inflation-linked and government-guaranteed for 25 years.
Solar PV systems can be retro-fitted on to existing roof structures, or incorporated into new build projects, says Mr Duncan. One advantage is that unlike some other renewable systems, they do not result in a loss of usable building space. On average, 50% of the energy produced will be used, with the combined income and savings normally paying back the initial investment within 10 years. There are also other benefits, he adds.
"Solar PV systems are one of the best options for reducing the carbon footprint of a business – or an ordinary household," says Mr Duncan. "The technology is proven, even in the UK, and because there are no moving parts it is reliable and virtually maintenance free."
The WE Jameson installation used 540 solar panels, to create a system specification of 99.9kWh. The feed mill site, which also has a country store selling a wide range of gardening, pet and DIY products, remained open throughout the construction period. The project put Duncan Renewables staff under particular pressure, due to changes introduced after a review of the FiT scheme this spring, says Mr Duncan.
"Clients with systems over 50kWh used to be able to claim 32.9 pence for every free kWh of electricity produced, but the payment has been reduced to 19 pence. The new figure applies to any projects commissioned after August 1 this year. We have been working hard since the spring, to ensure that ongoing projects were completed before the new rule was applied."
All commercial installations currently require planning permission, and need to be signed off by a district network operator, stresses Mr Duncan. Therefore, anyone thinking about installing a commercial PV system should allow a lead time of at least nine weeks. The necessary consents should also be obtained well ahead of the next scheduled changes to FiTs, in case further payment reductions are introduced.
Says Graham Jameson:
"Our feed mill has an enormous requirement for power, so reducing our reliance on carbon-based energy is a priority for us. Having a huge area of redundant roof space seemed to be a wasted asset and once the Government brought in the FiT scheme, fitting a PV system to the roof was the logical conclusion.
"The electricity will be used on site except outside production hours, when it will be exported into the National Grid. We knew that beating the August 1 deadline was going to be tough, and missing it would have reduced the returns from the system, so we needed an experienced contractor with skilled manpower. That’s why we chose Duncan Renewables, and they have not let us down – they have been professional from the outset and have shown great awareness of our obligations to our customers and for health and safety while working on our busy site. We are now planning an open day, so the general public can view the installation."
|
Farming items for Sale
|
John Deere 6420S Autoquad - Biddenden(GBP 24000)
John Deere 5300 - Bruton(GBP 10750)
Case IH 895 - Chippenham(GBP 9540)
John Deere - 6930P TRACTOR 2010 - Norwich
(Price on Application)
(Price on Application)
Used Quadtrac 450 STX - YORK(GBP 45000)
Related News
Old Mill holds seminar on the economics of renewable energy - 24 May 2010Renewable energy projects are becoming a realistic option for many farmers, and could yield considerable financial and environmental gains, says rural...
Forestry as a renewable energy source: scoping project launched - 18 Sep 2008Around #1.5 million of funding for a three year research project to examine the feasibility of short rotation forestry as a viable renewable energy so...
Animal Disease Levy – cost sharing or cost cutting? - 10 Oct 2006NFU meeting – The Hired Lad, Penrith on Monday 16 October Government has made it crystal clear that it intends to cut £90 million from the Defra bu...
Pakistan-Animal feed mills closed. - 19 Jan 2009PAKISTAN. TWO ANIMAL FEED PROCESSORS CLOSED. Capital Feed Mill and HB Feed Mill based in Pakistan, have been closed down by the Pakistan Environment...
Ireland-Animal feed mills must be licensed. - 31 Jan 2009IRELAND-LICENSES FOR ANIMAL FEED PLANTS. The Environmental Protection Agency should take control of licensing plants that process waste hum...
Finland-Salmonella traced to animal feed mill. - 12 Mar 2009FINLAND-SALMONELLA TRACED TO PIG FEED MILL. Fears are mounting in Finland that a strain of the Salmonella bacteria found in poultry feed may have ...
Poland-New animal feed mill. - 10 Apr 2009POLAND-Buhler installs feed processing line in Poland 07 Apr 2009 Poland’s compound feed sector has grown between 2004 and 2007 but seem to con...
United Kingdom-Explosion at animal feed mill. - 19 Apr 2009UNITED KINGDOM-EXPLOSION AT FEED MILL. Workers facing redundancy at a cattle feed mill in the UK were forced to evacuate the building after...
China-New animal feed mill. - 22 Apr 2009CHINA-NE FEED MILL OPENED. Careful organization and a fast pace of execution enabled the site relocation of Buhler Wuxi and Buhler China to be comp...
Kent farmer’s £20,000 project to help crop farmers cut costs - 07 Nov 2006Picture: Jeremy McCabe, a Kent arable farmer who is spearheading a £20,000 project to help crop farmers save costs as they cope with trading within a ...
